Product Description:
eWit 24/23 AWG copper wire insulated with Polyethylene. Two insulated conductors twisted together to form a pair and four such pairs seprated by a cross filler form the core unit jacketed with flame retardant PVC/LSZH. Enhanced performance cable enables delivering high speed network.

Flame Rating:
PVC-CM/CMR/CMX LSZH-IEC 60332-1; IEC 60754 1&2; IEC 61034-2 Specified and tested upto 250MHz or higher if required Compliant to ANSI/TIA 568-C.2 Cat6, ISO/IEC 11801 Class E

Applications

• 10 Base T (IEEE 802.3)
• 100 Base T (IEEE 802.3U)
• 1000 BASE-T (IEEE 802.3ab)
• 1000 BASE-TX
• TP-PMD (ANSI X3T9.5)
• 100 Mbps CDDI
• ATM 155
• 4/16 Mbps Token Ring (IEEE 802.5)
• Meets IEEE802.3af & 802.3at PoE standards

Basic Specifications

Cate 6 Patch Cord Conforming to ANSI/TIA/EIA568 C.2 or ISO/IEC:11801 latest
Yes

Patch Cord Type: Category 6
Unshielded/Unshielded Twisted Pair or Category
6 Foiled/Unshielded Twisted Pair
CAT6 S/FTP

Patch Cord Color
Green

Conductor Diameter
24 to 26 AWG

Length of Patch Cord (Meters)
1/2/3/5/10/15/20 etc

Applications: 0BASE-T, 100BASE-TX Fast
Ethernet, 1000BASE-T (IEEE802.3), 100VGAnyLAN (IEEE802.12), 250 MHz Broadband
Video, Voice, T1, ISDN, 155/ 622 Mbps ATM,
Power over Ethernet (POE, POE+, 4 PPOE)
Yes

Termination Type / Connection Type
Insulation Piercing Connection (IPC)

Modular Plug
RJ45

Plug Insertion Durability
>= 750 mating cycles

Conductor Material
Stranded Copper

Conductor Insulation Material
Polyethylene

Cable Jacket Material
Fire Retardant PVC

Environmental Specifications

Storage Temperature Range
-20°C to +70°C

Operating Temperature Range
-20°C to +70°C

UL Marking on Cable
Yes

CABLE DESCRIPTION;

• 1. 9/125 micron Single-mode Armored Optical Fibercables
• 2. Designed with a Loose tube construction
• 3. Tubes are gel filled to ensure protection against moisture ingress
• 4. Designed for use in the following applications like Backbone cabling, Campus site cabling & Outdoor Ducts, or Direct Burial applications
• 5. Cable contains up to 6 Fibers
• 6. Each loose tube contains 6 Optical Fibers
• 7. ECCS Armour
• 8. Central Strength – FRP Rod
• 9. HDPE Sheath

Product Description

eWit 24/23 AWG copper wire insulated with Polyethylene. Two insulated conductors twisted together to form a pair, and four such pairs separated by a cross filler form the core unit jacketed with flame retardant PVC/LSZH. Enhanced performance cable enables delivering high-speed network.

Flame Rating

PVC-CM/CMR/CMX LSZH-IEC 60332-1; IEC 60754 1&2; IEC 61034-2. Specified and tested up to 250MHz or higher if required. Compliant to ANSI/TIA 568-C.2 Cat6, ISO/IEC 11801 Class E.

Product Description:

eWit 24/23 AWG copper wire insulated with Polyethylene. Two insulated conductors twisted together to form a pair and four such pairs seprated by a cross filler form the core unit jacketed with flame retardant PVC/LSZH. Enhanced performance cable enables delivering high speed network.

Flame Rating:

PVC-CM/CMR/CMX LSZH-IEC 60332-1; IEC 60754 1&2; IEC 61034-2 Specified and tested upto 250MHz or higher if required Compliant to ANSI/TIA 568-C.2 Cat6, ISO/IEC 11801 Class E

Features:

• Low Insertion Loss
• High Back Reflection Box
• Stable Capability and High Reliability
• Excellent Mechanical Capability
• Boots in a Variety of Colors
• PVC Jackets as Default LSZH/OFNP

INTRODUCTION

eWit solid cables are the best twisted-pair cables in the market for transmitting data over local area Networks (LANs). These cables exceed performance requirements specified by the TIA/EIA-568B.2 / TIA/EIA-568C.2 and IEC 60603-7-4 standards. As streaming video and multimedia over LAN are gaining popularity, users demand faster data transmission and reduced waiting time. D-Link cables are ideal for simple, cost-effective and high-speed transmission performance. They support a higher signal-to-noise ratio, providing better reliability for current applications and higher data rates for future applications

Features
Specification

Cable Type:
UTP Solid CAT6

No of Wires:
4 Pair

Insulation
High Density Polyethylene

Rip Cord Material:
Nylon

Pairs
2 Insulated conductors twisted together

Construction:
23AWG

Sheath
FR-PVC Insulation thickness 0.2mm nominal

Insulation Thickness:
0.22±0.02mm

Insulation Diameter:
0.93±0.05mm

Characterstic Impedance
100 ± 15Ω

Insulation Resistance:
Min. 5000 mega ohms-km at 20°C

Cable diameter
6.1 mm nominal

Insulation Material:
Aluminum/ Polyester Foil + Tinned copper Braiding

Conductor Resistance
≤ 9.38 Ω/100m

Insulation Resistance:
100M Ω

Delay Skew
<45nS

NVP (%)
69%

Mutual Capacitance
‹ 5.6nF/100m

Resistance unbalance
5% Max

Temperature Rating:
-20° to +70°C

Operating Voltage
72V

Dielectric Strength
1.0KV dc or 0.75KV ac for 1min

Certification & Standards:
ISO, CE, FC, ROHS