• (0)

    EW-CT408

    Features
    Specification

    Cable Type:
    UTP Solid CAT6

    No of Wires:
    4 Pair

    Insulation
    High Density Polyethylene

    Rip Cord Material:
    Nylon

    Pairs
    2 Insulated conductors twisted together

    Construction:
    23AWG

    Sheath
    FR-PVC Insulation thickness 0.2mm nominal

    Insulation Thickness:
    0.22±0.02mm

    Insulation Diameter:
    0.93±0.05mm

    Characterstic Impedance
    100 ± 15Ω

    Insulation Resistance:
    Min. 5000 mega ohms-km at 20°C

    Cable diameter
    6.1 mm nominal

    Insulation Material:
    Aluminum/ Polyester Foil + Tinned copper Braiding

    Conductor Resistance
    ≤ 9.38 Ω/100m

    Insulation Resistance:
    100M Ω

    Delay Skew
    <45nS

    NVP (%)
    69%

    Mutual Capacitance
    ‹ 5.6nF/100m

    Resistance unbalance
    5% Max

    Temperature Rating:
    -20° to +70°C

    Operating Voltage
    72V

    Dielectric Strength
    1.0KV dc or 0.75KV ac for 1min

    Certification & Standards:
    ISO, CE, FC, ROHS

  • (0)

    Cat6 UTP Patch Cord, (1M Blue)

    INTRODUCTION

    eWit solid cables are the best twisted-pair cables in the market for transmitting data over local area Networks (LANs). These cables exceed performance requirements specified by the TIA/EIA-568B.2 / TIA/EIA-568C.2 and IEC 60603-7-4 standards. As streaming video and multimedia over LAN are gaining popularity, users demand faster data transmission and reduced waiting time. D-Link cables are ideal for simple, cost-effective and high-speed transmission performance. They support a higher signal-to-noise ratio, providing better reliability for current applications and higher data rates for future applications

  • (0)

    Cat6 UTP Patch Cord, (3M grey)

    SPECIFICATIONS
    • 4 Pairs Unshielded Twisted Pair (UTP) Cable
    • Conductor Metal: Bare Copper
    • Color Code: Gray • Conductor: 24 AWG
    • Insulation Material: HD-PE
    • Jacket Material: PVC UL94V-0
    • Heat-resistant: 60oC minimum (Temperature limited)
    • Flame property: The purpose of the vertical flame test is to screen out flammable wires. It follows the VW-1 (UL); FT-1 (CSA) standards.

  • (0)

    EW-CT608

    Product Description:

    eWit 24/23 AWG copper wire insulated with Polyethylene. Two insulated conductors twisted together to form a pair and four such pairs seprated by a cross filler form the core unit jacketed with flame retardant PVC/LSZH. Enhanced performance cable enables delivering high speed network.

    Flame Rating:

    PVC-CM/CMR/CMX LSZH-IEC 60332-1; IEC 60754 1&2; IEC

    61034-2 Specified and tested upto 250MHz or higher if required Compliant to ANSI/TIA 568-C.2 Cat6, ISO/IEC 11801 Class E

  • (0)

    EW-O3PC

    Features:

    • Low Insertion Loss
    • High Back Reflection Box
    • Stable Capability and High Reliability
    • Excellent Mechanical Capability
    • Boots in a Variety of Colors
    • PVC Jackets as Default LSZH/OFNP
  • (0)

    Product Description:

    eWit 24/23 AWG copper wire insulated with Polyethylene. Two insulated conductors twisted together to form a pair and four such pairs seprated by a cross filler form the core unit jacketed with flame retardant PVC/LSZH. Enhanced performance cable enables delivering high speed network.

    Flame Rating:

    PVC-CM/CMR/CMX LSZH-IEC 60332-1; IEC 60754 1&2; IEC 61034-2 Specified and tested upto 250MHz or higher if required Compliant to ANSI/TIA 568-C.2 Cat6, ISO/IEC 11801 Class E

  • (0)

    EW-HDI505

    Features

    • Superior video quality: True 4K (4096 x 2160 @60Hz)
    • HDMI Ethernet Channel functionality: Additional dedicated data channel supports networking
    • HDMI (3D, Deep Color, 4K); HDCP 2.2 compliant
    • Gold-plated connectors for reliable transmissions
    • Available in lengths from 1 to 20 Meter
    • Bend Radius 90°
    • RoHS compliant
  • (0)

    EW-PVCP2MM

    Specification

    Nominal Size
    2 Inch

    Outer Diameter (mm)
    60.2

    Wall Thickness (mm)
    1.70

  • (0)

    EW-ST408

    Product Description

    eWit 24/23 AWG copper wire insulated with Polyethylene. Two insulated conductors twisted together to form a pair, and four such pairs separated by a cross filler form the core unit jacketed with flame retardant PVC/LSZH. Enhanced performance cable enables delivering high-speed network.

    Flame Rating

    PVC-CM/CMR/CMX LSZH-IEC 60332-1; IEC 60754 1&2; IEC 61034-2. Specified and tested up to 250MHz or higher if required. Compliant to ANSI/TIA 568-C.2 Cat6, ISO/IEC 11801 Class E.

  • (0)

    6 Core OFC

    CABLE DESCRIPTION;

    • 1. 9/125 micron Single-mode Armored Optical Fibercables
    • 2. Designed with a Loose tube construction
    • 3. Tubes are gel filled to ensure protection against moisture ingress
    • 4. Designed for use in the following applications like Backbone cabling, Campus site cabling & Outdoor Ducts, or Direct Burial applications
    • 5. Cable contains up to 6 Fibers
    • 6. Each loose tube contains 6 Optical Fibers
    • 7. ECCS Armour
    • 8. Central Strength – FRP Rod
    • 9. HDPE Sheath
  • (0)

    12 Port Full Loaded LIU

    Features:

    • Aluminum base material for light mounting
    • Slim 1 Unit Mounting Height
    • Front mounted cable saddles for jumper management
    • Can manage both splices and terminations
    • Preassembled shelves in multiple configurations
    • Includes adapter panels for up to 48 LC, 24 SC, 24 ST, or 24 FC terminations
    • Rubber fibers slotted bracket built-in, metal splice shelf to protect fibers
  • (0)

    24 Port Full Loaded LIU

    Features:

    • Aluminum base material for light mounting
    • Slim 1 Unit Mounting Height
    • Front mounted cable saddles for jumper management
    • Can manage both splices and terminations
    • Preassembled shelves in multiple configurations
    • Supports adapter panels for up to 48 LC, 24 SC, 24 ST, or 24 FC terminations
    • Rubber fibers slotted bracket built-in, metal splice shelf to protect fibers
  • (0)

    Cat6 Patch Cord (EW-C6PC)

    Basic Specifications

    Cate 6 Patch Cord Conforming to ANSI/TIA/EIA568 C.2 or ISO/IEC:11801 latest
    Yes

    Patch Cord Type: Category 6
    Unshielded/Unshielded Twisted Pair or Category
    6 Foiled/Unshielded Twisted Pair
    CAT6 S/FTP

    Patch Cord Color
    Green

    Conductor Diameter
    24 to 26 AWG

    Length of Patch Cord (Meters)
    1/2/3/5/10/15/20 etc

    Applications: 0BASE-T, 100BASE-TX Fast
    Ethernet, 1000BASE-T (IEEE802.3), 100VGAnyLAN (IEEE802.12), 250 MHz Broadband
    Video, Voice, T1, ISDN, 155/ 622 Mbps ATM,
    Power over Ethernet (POE, POE+, 4 PPOE)
    Yes

    Termination Type / Connection Type
    Insulation Piercing Connection (IPC)

    Modular Plug
    RJ45

    Plug Insertion Durability
    >= 750 mating cycles

    Conductor Material
    Stranded Copper

    Conductor Insulation Material
    Polyethylene

    Cable Jacket Material
    Fire Retardant PVC

    Environmental Specifications

    Storage Temperature Range
    -20°C to +70°C

    Operating Temperature Range
    -20°C to +70°C

    UL Marking on Cable
    Yes

  • (0)

    Ewit CAT6 STP Gem

    Product Description:
    eWit 24/23 AWG copper wire insulated with Polyethylene. Two insulated conductors twisted together to form a pair and four such pairs seprated by a cross filler form the core unit jacketed with flame retardant PVC/LSZH. Enhanced performance cable enables delivering high speed network.

    Flame Rating:
    PVC-CM/CMR/CMX LSZH-IEC 60332-1; IEC 60754 1&2; IEC 61034-2 Specified and tested upto 250MHz or higher if required Compliant to ANSI/TIA 568-C.2 Cat6, ISO/IEC 11801 Class E

    Applications

    • 10 Base T (IEEE 802.3)
    • 100 Base T (IEEE 802.3U)
    • 1000 BASE-T (IEEE 802.3ab)
    • 1000 BASE-TX
    • TP-PMD (ANSI X3T9.5)
    • 100 Mbps CDDI
    • ATM 155
    • 4/16 Mbps Token Ring (IEEE 802.5)
    • Meets IEEE802.3af & 802.3at PoE standards
  • (0)

    Patch Cord

    Features:

    • Low Insertion Loss
    • High Back Reflection Box
    • Stable Capability and High Reliability
    • Excellent Mechanical Capability
    • Boots in a Variety of Colors
    • PVC Jackets as Default LSZH/OFNP