EW-ML10
Description
Fibre Cable For Networking
| Usage / Application for Door security locking with authorized in out control | YES |
| Should be Ideal for Wooden door – Glass door – Metal door – Steel door | YES |
| Door Handle should be Backset adjustable single latch design/Reversible type | YES |
| Lock type | Multipoint Locking system |
| Access Control Hardware Architecture (Device with | In built Controller |
| Access control software Architecture | Stand Alone |
| Types of Access Control Credentials / Device | Fingerprint + RFID card + Pin based Access Control |
| Finger Sensor Design | Passive capacitance and active capacitance |
| RFID sensing Design | Electromagnetic sensor |
| Type of RFID card supported | Mifare |
| Screen type | Touch |
| Optical/RFID sensing area | 1 inch X 1 inch |
| Optical sensor Resolution ± 1 % | |
| Fingerprint Identification time | 500 DPI |
| Fingerprint gathering time | 1 second |
| Fingerprint templates remain intact after power failure | 2 second |
| Authentication speed (FAR – False acceptance rate) | YES |
| Authentication speed (FRR – False rejection rate) | ≤ 0.1 % |
| Total Rotational angle | ≤ 0.0001 % |
| Automatic Template Distribution of Biometric Templates on Assigned Devices to User | 360 degree |
| Operating temperature | YES |
| Operating Environment | 0 degree centigrade to 45 degree centigrade |
| Fingerprint memory/storage capacity | Humidity RH 48 % to 80 % |
| Number of digits for input password/pin code | Support upto 99 fingerprint |
| Facility of RFID card registration | Capable of 12 digit input pin code |
| Auto locking Facility | Upto 100 RFID cards |
| Remote facility | YES |
| Provision of Super administrator and administrator – who can enroll and delete | Yes can be operated within defined distances |
| Provision of flexible user pin | YES |
| Working power/Power input | NO |
| Dynamic state power consumed | 4 x 1.5V AAA alkaline cell |
| Static state power consumed | 100 milliAmpère |
| Dead bolt error alarm | 8 microampere |
| Fire sensor | YES |
| Alarm provision – when door is not closed properly | YES |
| Tamper detection (Security alarm – when the invalid operation is made frequently by other than user) | YES |
| Low Battery warning | YES |
| Customized Report Generation Facility | voltage <4.8 volt |
| Back up unlock mechanism | NO |
| Installation and Commissioning is included in the scope of supply | YES |
| Body material | YES |
| Thickness of body material | ABS plastic (Acrylonitrile Butadiene Styrene) |
| Suitable for Door thickness | 2 mm |
| Front panel material | 8 millimeter |
| Back set length/Case size | Zinc alloy |
| Outside Trim dimensions – to be declared by seller | 57 mm/76 mm |
| Finish type | 57 mm/76 mm |
| Front panel colors | Matt finish |
| Warranty | Black |
| Warranty in years for Battery life | 1 |
| BIS registration under CRS of Meity | 1 |
| BIS registration number and its validity (write Not Applicable – if not applicable) | YES |
| RoHS compliance certification | YES |
| Type Test Certificate Covering (TCC) all parameters and environmental tests from STQC certified lab | NO |
| Test reports to be furnished to buyer on demand, if claimed to be available | NO |
Reviews (0)
Reviews
There are no reviews yet.