HDPE TELECOM DUCTS
HDPE Duct is available in various length as per customer requirement 32/26 mm, 40/33 mm, and 50/42 mm with and without the rope. Colors available include yellow, red, violet, green, blue, grey, orange, and brown. Any other color or size as per customer requirement can be supplied so as to meet customers choice.
Product Application:
- RailwaysInformation Network
- CableService Providers
- Telecommunication
- ComputerNetworking
- CCTV
- Oiland Gas Pipeline Network
- DefenseNetwork
Specification:
Diameter 40 mm outer diameter with min. wall thickness of 3.5 mm
Co-efficient of friction <0.1
Blowing Pressure Upto 10 Bar
Tensile Strength 1000 to 5000 N
Impact resistance 15 to N*M Environmental stress Crack Resistance As per ATSM D-1693
Crush Resistance Test  As per TEC Spec No G/CDS-01/01 Dec 1994 and amendment No.1 Internal Pressure Creep Rupture Test 48 hrs at 800C as per IS 4984-1995
Impact Resistance Test No Crack or split as per is-12295 (Part 9)- 1986
Revision Test  Less than 3% as per IS 4984-1995 Operating Temperature Range -40o C to +70o C
Note: We use the co-extrusion technique and High-Density PolyEthylene as a base raw material to manufacture permanently lubricated HDPE Ducts. The grade of raw material is ultraviolet grade confirming to ISO 1183 & 1133, IS:2523, IS:7328 1992 or and designated as PEELA 50T 012 (CACT Approved) and facilitates the inner layer permanently with the material DOW Coming grade 50MB002.
Reviews
There are no reviews yet.